What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
14.06.2025 00:09

but I think this circuit , shows a few more pieces.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
[old diagram got deleted by accident]
An AC voltage/ current source, and an ac inductive load.
eight
One is “what exactly is in a ‘surge protector’ ? ”
Barnstars:
The third is lightning and “how it gets conducted into a home.”
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
At least they know the answer if they wanted it.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
What do you think of the Quora group "It's Ok to Be White" for people who are proud of being white?
These are simplified answers to the original question, and does not change anything I wrote above.
In schematic diagrams this is the symbol for a fuse:
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This is 'the assistant's answer'
This is where this question deviates from being a 'generic' question, and becomes more specific.
Amazon Draws Whole Foods Closer in Grocery Unit Reorganization - Bloomberg
2024–10–10[John johnson John Johnson ]
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
[image of Common-mode choke]
How do I become a Buddhist, and can someone explain Buddhism to me?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
A fuse is a non-resetable over current circuit protector.
It seems Mohan does not understand the difference between a comment and an Answer.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
But it can get overloaded, and no longer works.
Edit 2024–10.
What is your most erotic sex story?
So, the voltage could go up to 500 volts, and the fuse will not open up.
Here is a simplified AC power diagram.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
the problem then depends on "how fast does the fuse operate?".
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
What is the difference between the terms "Millennials" and "kids"?
He then describes the function of a fuse.
First Sentence:
nine
What is lightning?
He then describes Rainy Season and Lightning.
He then asserts :
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Now when you have a certain ac resistance, then a current flows in a loop.
what exactly is a ‘surge’ protector?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
a photo is worth a thousand words.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This device then solves the entire problem.
There are two important concepts here.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
(Dc diagram shown, AC is similar).
The MOV will conduct when the voltage exceeds 50% of line voltage.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
But… the neutral is now “floating” because of the 1 ohm resistance.
2024–10–16 [ OO OLAOYE OYEBODE ]
A circuit breaker is similar, but is resettable.
There are three different concepts here that are getting confused.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
These devices are installed between the “hot” and “neutral” and protective ground.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
This one hit behind the barn.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
For this case there are devices called Metal oxide varistors (MOV).
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
What does a fuse do?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Upvotes:
2024–10–14 [Omar Gharbi Omar Gharbi ]
so, what happens?
The bolt then partially travels down the line to your home.
At one ohm, the resistor has a maximum of 1 watt power.
Because the load is inductive, the current lags the voltage.(by a bit).
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
One
I post the exact comment here.
The other is “what does a “fuse” do?”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
It also is a device that limits the change in current flow.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This is where the MOV conducts again, and dissipated the energy.
but this device (an Inductor) … impedes the rapid changes in the current.
This is the picture of an electronic coil of wire wound around a core of magnetic material.